業界の知識

MTSCO 2006 年設立、100 以上の国と地域の顧客にサービスを提供

なぜニッケル合金の方が高価なのでしょうか?

Nickel is a ferromagnetic metal element with excellent properties such as corrosion resistance, high temperature resistance, oxidation resistance and good ductility. It is widely used in metallurgy, chemical industry, aerospace and other fields. It is an impor......

続きを読む

劣化したステンレス鋼溶接管の見分け方は?

1. Folding Fake and inferior welded stainless steel pipes are easy to fold. Folding is a variety of fold lines formed on the surface of stainless steel pipes. This defect often runs through the longitudinal direction of the whole product.The reason for foldin......

続きを読む

溶接技術の分類

Directly welded pipes: the use of small size model can avoid stress corrosion, hot cracks and deformation, and the welding current is 20% lower than that of high carbon steel. In order to ensure the ignition of the electric arc, the DC reverse connection is a......

続きを読む

溶接パイプの一般的な探傷方法

In the process of manufacturing and using welded pipe, nondestructive testing to ensure weld quality is particularly important.  The common nondestructive testing methods for welded pipes are: ultrasonic testing, off-line magnetic flux leakage testing and edd......

続きを読む

浸透探傷検査とは何ですか?

Penetrant testing (abbreviated as PT) is a nondestructive testing method for inspecting surface opening defects based on the principle of capillary action. This method is one of the five conventional nondestructive testing methods and is a comprehensive scienc......

続きを読む

最も広く使用されている NDT: 放射線検査

Radiographic testing (RT). Radiography (RT) is a nondestructive testing method that uses X-ray or g-ray to penetrate the test piece and film as the equipment for recording information. This method is the most basic and widely used non-destructive testing metho......

続きを読む

ステンレスは錆びますか?はい!

When there are brown rust spots on the surface of stainless steel pipe, people are surprised: they think that "stainless steel is not rusty, rusty is not stainless steel, maybe there is a problem with the steel".In fact, this is a one-sided wrong view of the l......

続きを読む

NDT 法: 渦電流検査

Based on the principle of electromagnetic induction, the nondestructive testing method is called nondestructive testing, which can nondestructive evaluate some properties of conductive materials and their workpieces by detecting the change of induced eddy curr......

続きを読む

超音波検査とは何ですか?

Ultrasonic testing is mainly used to detect buried defects in butt welds and cracks on the inner surface of pressure vessel welds. It is also used to detect possible cracks in Pressure Vessel Forgings and high-pressure bolts.Ultrasonic testing can be divided i......

続きを読む

なぜステンレス鋼管に溶体化処理を施す必要があるのでしょうか?

Austenitic stainless steel is softened by solid solution treatment. Generally, the stainless steel pipe is heated to about 950 ~ 1150 ℃ and kept warm for a period of time, so that the carbides and various alloy elements are fully and evenly dissolved in auste......

続きを読む

溶接にはどんな種類があるの?

Welding: usually refers to the welding of metal. It is a forming method to connect two separated objects into one by heating or pressurizing, or both at the same time.Classification: according to the different heating degree and process characteristics in the ......

続きを読む

なぜ鋼管に熱処理が必要なのでしょうか?

The function of heat treatment is to improve the material mechanical properties of steel pipe, eliminate residual stress and improve its cutting performance.According to different purposes of heat treatment, heat treatment process can be divided into two categ......

続きを読む

アイススケートにはどのような種類の鋼が使用されていますか?

Skates are required in figure skating, synchronized skating, speed skating and short track events stipulated by the International Skating Union (ISU) and ice hockey events of the International Ice Hockey Federation (IIHF). What kind of steel is used for ice sk......

続きを読む

超合金はどこに使用されていますか?

Superalloy (also known as heat-resistant alloy) is a metal material with long-time creep resistance, high endurance strength and high corrosion resistance under the simultaneous action of stress and high temperature (above 600 ℃). With excellent oxidation res......

続きを読む

金属引張試験で知っておくべき指標

Tension is a simple mechanical property test. Within the test gauge, the stress is uniform, the measurement of stress-strain and its performance indexes is stable, reliable and convenient for theoretical calculation. Through the tensile test, the most basic me......

続きを読む

オーステナイト系ステンレス鋼の溶接の秘密

Stainless steel can be divided into four categories according to its steel structure, namely austenitic stainless steel, ferritic stainless steel, martensitic stainless steel and AUSTENITIC FERRITIC duplex stainless steel. The following mainly analyzes the wel......

続きを読む

溶接が悪いですか?どのような要因が影響するのか見てみましょう

Weldability of metal materials refers to the ability of metal materials to obtain excellent welded joints under certain welding processes, including welding methods, welding materials, welding specifications and welding structure forms. If a metal can use more......

続きを読む

2021年、MTSCOさん、お会いできてありがとうございました!

Last week, Jiaxing MT Stainless Steel held the annual year-end summary meeting. 2021 was an extraordinary year for international trade and steel industry. The global epidemic has not been alleviated, and China shoulders most of the production responsibility......

続きを読む

金属の被削性

The machinability of metal materials usually refers to a kind of performance or quality that can be clearly defined and measured as a sign of its machinability. Generally speaking, good machinability should be: good tool durability or high cutting speed under ......

続きを読む

ショットピーニング発射体にどの材料が使用されているか知っていますか?

Different kinds of projectiles:1. The hardness of cast steel shot is generally 40 ~ 50HRC. When processing hard metal, the hardness can be increased to 57 ~ 62Hrc. Cast steel shot has good toughness and is widely used. Its service life is several times that of......

続きを読む

ステンレス鋼を酸洗いして不動態化するにはどうすればよいですか?

1. Impregnation method:stainless steel pipeline, elbow and small parts are most suitable for this method, and the treatment effect is the best. Because the treated parts can be fully immersed in pickling and passivation solution, the surface reaction is compl......

続きを読む

なぜステンレス鋼は腐食に強いのでしょうか?

The corrosion resistance of stainless steel is mainly due to the addition of a high content of Cr element in the steel. Cr element is easy to oxidize and can quickly form a dense Cr2O3 oxide film on the surface of the steel. The corrosion resistance of stainle......

続きを読む

304/316 をフランジ継手に使用してはいけないのはなぜですか?

In the actual operation of flange joint, bolt force relaxation is inevitable, and the bolt force of initial tightening will always drop with time. Especially for flange joints under high temperature and severe cycle conditions, after 10000 hours of operation, ......

続きを読む

炭素含有量が異なると鋼にどのような影響がありますか?

Carbon steel is divided into:①Mild steel with carbon content less than 0.25%;② Medium carbon steel with carbon content of 0.25% ~ 0.6%;③ High carbon steel with carbon content greater than 0.6%.Mild steel is a carbon steel with carbon content less than 0.25%......

続きを読む